Quality Assurance | REACH Certified | Wellgo
Our 5-Step Quality Control Process
Every pair of Wellgo boots undergoes rigorous quality inspection before leaving our factory.
- Incoming Material Inspection — Leather thickness, grain quality, color consistency
- Cutting & Pattern QC — Precision checks on every cut piece
- Assembly Line Inspection — Stitching, sole attachment, elastic tension
- Finished Product Check — Visual inspection, size accuracy, comfort test
- Pre-Shipment AQL 2.5 Sampling — Independent random sampling per ISO standards
Certifications
- REACH Compliant (EU chemical safety)
- 94/11/EC Labeling (EU footwear material labeling)
- GPSR Ready (EU General Product Safety Regulation)
Material Standards
- Leather thickness: 1.4mm - 2.0mm (varies by style)
- Tensile strength: Tested to EN ISO 3376
- Colorfastness: Grade 4+ (dry/wet rub)
- Flexion test: 50,000+ cycles without cracking
- Sole adhesion: >4 N/mm bond strength
Defect Rate
Our quality control maintains a defect rate below 2% across all production runs — well within international B2B standards.
Uncompromising Standards: Our Commitment to Footwear Excellence
Quality is not just a department at Wellgo; it is the fundamental principle that guides our entire manufacturing process. For European B2B buyers, product reliability and safety are paramount. We have implemented a multi-stage Quality Assurance (QA) system that begins with raw material inspection and ends only when the final container is sealed. Our factory follows ISO 9001 standards, and we utilize the AQL (Acceptable Quality Level) 2.5 standard per ISO 2859-1 for all production runs, ensuring a defect rate well below 2%.
Material safety is a critical concern for the EU market. Wellgo is fully REACH compliant, ensuring that all leathers, linings, adhesives, and hardware are free from restricted chemicals. We conduct regular material testing both in-house and through third-party laboratories. This includes tests for colorfastness, tensile strength, and abrasion resistance. By providing material test reports upon request, we give our clients the documentation they need to meet European regulatory requirements and provide peace of mind to their end consumers.
During the production phase, we employ dedicated quality controllers at every workstation. From the precision of the leather cutting to the durability of the outsole bonding, every step is scrutinized. We also welcome and facilitate third-party inspections from reputable organizations such as SGS or Bureau Veritas. This level of openness reflects our confidence in our craftsmanship. When you partner with Wellgo, you are choosing a manufacturer that values the integrity of your brand as much as you do, delivering boots that are built to last and designed to impress.
Quality Assurance Frequently Asked Questions
Is Wellgo REACH certified?
Yes, all Wellgo products are REACH compliant, ensuring they meet European chemical safety standards for footwear.
What is your typical defect rate?
Our defect rate is maintained below 2% across all production runs through rigorous multi-stage inspections.
Do you accept third-party inspections?
Yes, we welcome third-party inspectors from firms like SGS, Bureau Veritas, and Intertek to visit our factory.
What leather thickness do you use?
We typically use leather with a thickness range of 1.4mm to 2.0mm, depending on the specific boot style and durability requirements.
What AQL standard do you follow?
We strictly adhere to the AQL 2.5 standard per ISO 2859-1 for all our bulk production batches.
Can you provide material test reports?
Yes, we can provide comprehensive REACH test reports and internal material durability reports upon request.